What are the winter anti freezing techniques for laser cutting machines

Release time:

2024-01-17

The severe cold in the 24 solar terms is about to arrive, which means that when the weather enters the mid year cold, the temperature in some areas has already dropped to below zero. People should add clothes, and laser cutting machines should also pay attention to antifreeze to avoid damage caused by freezing in the cold winter. This winter anti freezing plan for laser cutting machines should be collected well.

The basic principle of anti freezing for laser cutting machines is to prevent the coolant in the laser cutting machine from reaching the freezing point. Let's list several specific methods one by one.

Method 1: Do not turn off the water cooler after the laser cutting machine is not working.

If the laser cutting machine is not working and the power supply is not cut off (power outage), do not turn off the water cooler. Keep the coolant in a circulating state and adjust the conventional temperature to around 10 ℃. This way, the coolant temperature cannot reach freezing point, so it will not damage the laser cutting machine.

Method 2: Empty the coolant inside the laser cutting machine

Drain the coolant from each component of the equipment through the drainage port of the laser cutting machine. And inject pure gas to ensure that there is no coolant in the entire water circulation cooling system. This can also ensure that the laser cutting machine will not be damaged by low temperatures.

Method 3: Replace the coolant inside the laser cutting machine

Cars running on the road in winter will replace the winter antifreeze, and vehicle antifreeze can also be added to the equipment. But you need to choose a brand of antifreeze, otherwise the antifreeze contains impurities that can stick to the pipes of components such as lasers and cause damage to the equipment. Antifreeze solution cannot replace purified water or live ion water for long-term use. Replace it in a timely manner after winter has passed.

The above methods play a crucial role in ensuring the normal operation and equipment safety of laser cutting machines in winter. Suggest using the first two methods. Method one is time-saving and labor-saving, but in the event of a sudden power outage, it may cause damage to the laser cutting machine. Method 2 is quite labor-intensive and a waste of resources. But it is indeed safer and more effective compared to the other two methods.

Kind reminder:

In the second year, before starting the operation of the laser cutting machine, start the mechanical equipment and inspect the entire machine for any missing oil and coolant. It is necessary to promptly supplement and replace them, and identify the cause of deterioration. To improve the efficiency of laser cutting machines.